Other

The Super Booster rear hub spacer kit is designed to give your 148mm rear thru-axle hubs the extra boost they need to fit any 157mm frame.

Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp. - Laser-etched All-City logo - Aluminum body with stainless steel hardware

- Axle washers for use with 19mm bottom brackets - 19.1x26x2.0mm - Interface: 19mm - Sold in a 10-pack

- Bar end plugs - Sold in pairs

- Alloy top cap with hollow bolt to allow for brake cable pass-through - ED black durable finish - Size: 1-1/8"

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 12mm - Outer Diameter: 24mm - Width: 6mm

This magnetic stem cap is designed exclusively for the unique shape of the revolutionary Ritchey Chicane stem. - Material: alloy - Fits only Chicane stem - Weight: 6g

Featuring a tasteful High Polish Silver finish with laser printed logo, this top cap perfectly matches the graphics on Classic stems for a clean, coordinated aesthetic. Compression bolt and plastic bolt cover are included. - Material: alloy - Includes top cap, bolt, and plastic cap - Fits with 1-1/8" stems - Weight: 8g

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 17mm - Outer Diameter: 26mm - Width: 5mm

- AL6061-T6 alloy seatpost clamp with CNC-machined cut-outs - Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts - 29.8mm for 27.2mm seatpost and chromoly frame - 31.8mm for 27.2mm seatpost and aluminum frame - 34.9mm for 30.9mm seatpost and aluminum frame, or 31.6mm seatpost and carbon frame - 16mm height

The Profile Design Flip/Ergo platform is designed to give riders the freedom to find an optimal low stack position with the ability to hold the bar tops when climbing. There are 80 distinct position options achievable just by moving the armrests. As a clip-on bar it is also possible to adjust the extension width, length, and tilt easily. - 50a extensions offer a 50deg ski bend shape with a 7.5mm (per side) lateral shift - Extensions 340mm long and can be cut to size to suit nearly every rider - Bracket: Flip - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 112mm to 280mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Stack: 40mm - Weight: 587g

Have a current Bomber Z1 but missing that Coil Spring feel? Or, maybe you have a Bomber Z1 Coil already and want to customize its ride. Look no further. With this conversion kit, you can now convert your Bomber Z1 air fork easily to the Z1 Coil. Buy this upgrade kit and follow the install instructions (or have your bike shop swap it out for you) and you, too, will be riding the buttery-smooth Z1 Coil in no time. PLEASE NOTE: To do the conversion, you will need the Bomber Z1 Plunger & Topcap Kit.

A five-piece IGUS bushing spacer kit for mounting rear shocks. - Compatible with x eyelet shocks using IGUS bushings mounted in the shock eyelet - Select the correct hardware kit for your mounting bolt diameter (e.g. 6mm, 8mm) and frame mount width (e.g. 22mm, 24mm)

- Includes: 2-16mm &2-14mm Aluminum Caliper pistons, Seals & O-rings—Guide Ultimate

Enduro 24X37 ABEC-3 Sealed Bearing. Replacement bearing for Wheels Mfg bottom brackets for 24mm (Shimano) and 22mm/24mm (SRAM GXP) spindle cranks. ABEC-3 bearings are the most economical bearing Enduro offers but are extremely tough and durable. Grade 10 chromium steel balls are within 10/1,000,000" round. These are twice as round as the industry standard. 52100 high carbon chromium alloy races go through a vacuum de-gassing process resulting in the purest chromium alloy steel, hardened to R-62. Keeping everything together are riveted steel retainers and sealed with LLB type seals. - Dimensions: OD: 37mm / ID: 24mm / Width: 7mm - ABEC-3 - Grade 10, 5/32" chromium steel balls - Enduro Part # BB MR 2437 LLB-BLK - Imported - Sold in a bag of 2

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

North Shore Billet Derailleur Hangers - All hangers are CNC machined from 6061 T6 Aluminum for strength and stiffness beyond OEM hangers - Protective anodized pewter finish - Hardware not included

North Shore Billet Derailleur Hangers - All hangers are CNC machined from 6061 T6 Aluminum for strength and stiffness beyond OEM hangers - Protective anodized pewter finish - Hardware not included

North Shore Billet Derailleur Hangers - All hangers are CNC machined from 6061 T6 Aluminum for strength and stiffness beyond OEM hangers - Protective anodized pewter finish - Hardware not included

DT Swiss Sinc Ceramic cartridge bearings. - The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 2737 Bearing for 240s Predictive Steering Hubs

MSW Seatpost Clamps keep your saddle and seatpost from moving around while you’re out riding. Tough and dependable, they’re available in polished silver or black finishes, as well as four common sizes. - MSW Seatpost Clamp - 34.9mm, Black

Secu Clip Safety Release for Full Fenders is used on the SKS Chromoplastic Longboard Fenders and some Bluemel/Commuter II Fenders. The Safety Release must be used with full fender sets to prevent accidents if a foreign object gets stuck between the fender and the front wheel. Made in Germany

Hope Tech 4 master cylinder reservoir lids are a perfect fit as a replacement or for those looking for a customized look. - Made from high quality precision CNC machined aluminum - Durable anodized finish - Includes (2) torx cap screws - Only compatible with Hope Tech 4 brake levers

Hope Brake Lever Parts

Desgined to increase the stiffness of the EPS front derailleur on frames with flexible braze-on mounts, especially frames with carbon fiber mounts. - Required for use on carbon frames with carbon front derailluer braze on mounts

Campagnolo front derailleur parts for repairs.

Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.

Campagnolo Cassette Spacers

Complete remotes and remote components for KS dropper posts.