Other

$49.99
Bontrager's Speed Concept Seatpost Cap lets you get your position dialed for your next triathlon or time trial. Two different saddle offsets and widely a adjustable saddle angle means you'll find the perfect fit for your race against the clock.

$29.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase
- Forged 6061 aluminum
- Threaded alloy top cap

$14.99
These bar end adapters are required if you wish to add clamp-style bar ends to your Bontrager Satellite Plus Isozone handlebars.
- Required for bar end use on Satellite Plus Isozone bars
- For use with clamp style bar ends
- Includes 2 adapters and 2 rubber handlebar inserts.
- Bar end sold separately

$14.99 - $19.99
Key features:
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory.
- Bases for use with Bontrager Pro Blendr stem
- Add any XXX accessory mount (sold seperately) for an elegant, integrated look

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Note: The mounting holes on Wheels Mfg DROPOUT-138 are 23mm apart, center-to-center. Do not confuse this hanger with Wheels Mfg DROPOUT-120.

$5.95 - $13.95
$15.00
Up to 60% Off
- Durable custom-molded plastic guard
- Co-molded rubber exterior to help quiet chain-slap noise
- Easy installation and removal

$46.95
$95.00
51% Off
The Ohlins Stumpjumper Spring sets a new benchmark for spring rate accuracy and light weight for steel springs.
- Ultra-fine spring rates to ensure perfect set up for all weights.
- Spring rates are broken down to 4 N/mm (23 lbs./in).
- Fits Ohlins TTX shock absorber for Stumpjumper FSR only.
- Made with proprietary ultra lightweight steel, it's incredible for keeping your build weight down for trail riding.

$46.95
$95.00
51% Off
The new generation spring series features a race-ready weight with big mountain strength. You'll also find advanced technologies that feature a multi-step surface treatment process, as well as cutting-edge heat treatments. Lastly, we use wire materials that allow us to stress the wire harder, without causing damage to the spring, and therefore design lighter springs.
- Precise spring rates are broken down to 4 N/mm (23 lbs./in).

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring bolt

$199.99
The RockShox AXS controller ushers in the next generation of a clean cockpit with a completely cable-free design. With the touch of a button, operate the new Reverb AXS seatpost with less effort than ever before. Open up all the possibilities with AXS.
- AXS app lets you customize configurations, monitor battery levels, update firmware and much more for all RockShox and SRAM AXS enabled components
- Compatible with Matchmaker X
- System is completely water and dust proof to IP69K

$40.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Scott Part #254093-222 - For Shimano Direct Mount derailleurs - M12x1.0 Thru Axle - Attaches to frame with (1) special M5 flat head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (Long - Bolt Only)

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish Notes: - Post on this hanger is 16.5mm (.650) in length with an M12 x 1.25 thread. Please check your hanger before ordering to make sure this is a match. - Trek recommends that you apply a removable thread-locker such as LOCTITE 243 to the threads during re-assembly. Failure to do so may result in fasteners loosening during use.

$3.98
- 6061 Forged Alloy
- Made to O.E.M. specifications
- Correct hardness to reduce damage to frame upon impact

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M6 Chainring Bolt

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws Note: Not compatible with 2012 Cervelo models

$3.99 - $6.50
The Problem Solvers Brake Boss Plugs are perfect for when you've removed your cantilever or linear-pull brakes in order to run disc brakes or a fixie setup. These plugs thread into the empty frame bosses and lend a clean look, while also protecting the threads inside the frame from corrosion.

$9.99
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims.
-100mm long
-3mm lip
-Alloy
Problem Solvers Seatpost Shims are not intended for use with carbon seatposts

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Flat Head Screws

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$18.99 - $19.99
The Problem Solvers Backstop bolts onto the frame to provide two stops for your cable housing. It's made of light, durable CNC-machined aluminum with a stainless-steel bolt, and the stops are slotted for easy cable installation/removal.

$11.99 - $12.99
The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA.
- For bikes with a factory mounting plate (includes bolt)
- 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over)
- Certified Non-Corrosive Casting
- Snap Action Mechanism
- Non-Slip Clamping Surface
Page 1 of 6
Next page