Parts & Accessories

Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.

Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.

- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames

Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).

Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.

Add Saris' Freedom Long Wheelbase Bar to your Saris Freedom rack (sold separately) to carry an extra long wheelbase bicycle like a tandem or recumbent. The rack holds two bikes of up to 35 pounds each, and the Long Wheelbase Bar holds a bike that measures up to 57 inches axle to axle.

Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.

There's nothing more annoying than riding in a car with a bunch of unwieldy poles and paddles poking you in the eyes. Get them out and up on your rack with these mounts. Theyll strap down anything up to 5\u001D in diameter from oars, ski and fishing poles to PVC pipe on your way home from the hardware store. - Holds a broad range of sizes and shapes up to 5\u001D diameter Removable paddle pad for more versatility - Corrosion resistant buckles Hypalon straps wrap around smaller items and hold them firmly in place - Great for carrying paddles, oars, masts, ski poles, fishing poles, PVC pipe, etc. - Comes with 2 mounts per package

A fork hitch for bike transportation that allows for versitle mounting options on any flat surface. - Pre-aligned positioning for easier fork installation - Remove Boost 15 x 110mm insert to accommodate 20mm axles - Easy mounting to any flat surface - Rust-free Aluminum construction - The platform is 3.75 x 1.5" and the holes are 3" center to center Compatible with following: 15 x 110 mm (Boost, silver insert) 15 x 135 mm (Borealis, Fatback, 9zero7 + other Fat Bike forks) 15 x 142 mm (Salsa + others) 15 x 150 mm (Rock Shox Bluto Fork + others) 20 x 110 mm

Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).

If you have a trunk or rear rack and a bike with an unconventional frame (such as a full-suspension or ladies bike), you probably need Sunlite's Crossbar Adapter. Vinyl-coated hooks on either end hold your bike and act as a "top tube" for easy transportation. In the middle, a quick-release telescoping adjustment ensures the Crossbar Adapter will fit almost any bike.

Secure your through-axle-equipped bike to your fork mount bike rack (sold separately) with RockyMounts' DriveShaft. This adapter allows you to quickly and easily mount a bike with a 15mm or 20mm through-axle fork to your quick-release fork mount rack. It also comes with a lock for peace of mind.

Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.

- Outer pad is constructed of 600D + PVC. A durable denier fabric with herringbone weave and DWR treatment for water repellency - Micro-brushed inner lining protects your tailgate from rub and wear marks - Raised bumpers facing into the truck box seat most frames snugly preventing bikes from coming into contact while shuttling - Raised square pads along the outer tailgate (small pad only) offer the additional security of holding forks in place - When the shuttle gets steep and rowdy, secure frames down with a Velcro-backed webbing loop and strap system - Grommet system offers the ability to lock bikes - Storage pocket - Two sizes - Small - 39.5" x 57" wide with 5 straps, Large - 47” x 61” wide with 6 straps

Delta's pre-aligned positioning bike hitch allows for easy fork installation. It features special anti-rust treatment with a tough powder-coat finish. This ultra-rigid 9mm skewer allows you to easily carry your front wheel with a Delta Wheel Hitch or Wheel Holder (each sold separately). - Pre-aligned positioning for easier fork installation - Special anti-rust treatment with tough powder-coat finish - Features patented Delta locking lever - Base Dimensions 4" x 1.5" x 1.75" - Mounting Holes 3" center to center - Ultra-rigid 9mm skewer - Carry your front wheel with a Delta Wheel Hitch (sold separately)

Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.