Rigid

$525.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Custom DT RWS Skewer included
- 3.0" max recommended tire size
- Axle to Crown Length: 480mm
- Brake Mount: IS Disc Brake 160mm
- Crown Race: 40
- Defined Color: Black
- Front Axle: 15 x 100mm
- Offset: 51mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Tapered
- Weight: 750 grams
- Wheel Size: 29-inch
$565.00
For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more.
- 15mm thru-axle with 110mm Boost spacing
- Post-style brake mount
- 1.5" tapered carbon steerer
- Two sets of Three-Pack mounts
- ASTM Condition 3 - For rough off-road riding and jumps less than 24"

$450.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness.
When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.

$550.00
A purpose built carbon fiber fork for gravel and cyclocross applications featuring internal hose routing, flat mount brake compatibility, and clearance for up to 50mm tires. This fork is perfect for gravel riders looking for more clearance, weight savings, compliance, and the versatility of fender mounts to enhance their gravel grinding experience.
- Material: Carbon
- Weight: 520g
- Steer Tube Length: 350mm
- Rake: 50mm
- Axle To Crown: 395mm
- Max Rotor Size: 140mm – 160mm
- Max Tire Clearance: 700c x 50c, 27.5 x 2.25-inch
- Crown Race Diameter: 1.5-inch
- Torque Spec - Steer Tube: 5.5Nm
- Torque Spec - Axle: 8Nm

$449.99
Up your game with this all-Carbon rigid fat bike fork. Fitting up to 4.8" tires with a 26" wheel or 3.0" with a 27.5", this weapon will put your fat bike on the diet it deserves.
- Full OCLV carbon construction with tapered 1-1/8-1.5" headtube 51mm offset
- Accepts post mount brakes, up to 210mm max rotor size
- 490mm axle-to-crown length, fits up to 26 x 4.8" or 27.5 X 3.0" tires
- Includes 150x15mm thru-axle and carbon compression steerer plug
- Carbon armor replaceable dropout guards

$209.99
Upgrade your road rig with Origin-8's Cromo-Lite II Road fork. It features full cromoly construction for a sublimely smooth ride.

$89.99 - $99.99
• Caliper brake mounts
• 45mm rake
• Chromoly construction
• Threadless fork
• 300mm steerer length

$59.99
- Hi-tensile steel construction
- Available with brake studs or without
- 60mm rake
- Type: Cruiser Size: 26"
- Steerer Type: Threaded Steerer
- Steerer Length: 250mm
- Axle-to-Crown: 400mm
- Axle: 3/8"
- Thread Length: 125mm
- O.L.D.: 100mm

$45.99
• Caliper brake mounts
• 35mm rake
• High-tensile steel construction
• 1-inch steerer diameter
• 165mm steerer length
• Threaded fork
• Compatible with 16-inch wheels

$89.99
Dimension Road Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing.
- Forged dropouts with eyelets, welded unicrown construction
- Designed for short-reach caliper brakes
- 25 x 14mm tapered oval blades
- Axle to Crown Length: 374mm
- Brake Mount (Fork): Short Reach Caliper (39mm-49mm)
- Color: Black
- Crown Race: 30
- Defined Color: Black
- Front Axle: 10mm x 100mm
- Material: Steel
- Offset: 50mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Tube Length (mm): 300
- Steerer Type: Straight
- Weight: 773g (1-inch); 780g (1 1/8-inch)
- Wheel Size: 700c

$89.99
700c Hybrid fork with Cantilever Mounts
- Forged dropouts with eyelets, straight-gauge oval-tapered blades
- Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing
- Welded unicrown construction
- Clearance for 50mm wide fenders (1 1/8-inch)
- Axle to Crown Length: 403mm (1 1/8-inch); 412mm (1 1/8-inch SC); 403mm (1-inch)
- Brake Mount (Fork): Canti Studs
- Color: Black
- Crown Race: 30 (1 1/8-inch, 1 1/8-inch SC); 26 (1-inch)
- Front Axle: 10mm x 100mm
- Material: Steel
- Offset: 50 mm
- S.H.I.S. Stem Clamp Diameter: 28.6 (1 1/8-inch, 1 1/8-inch SC); 25.4 (1-inch)
- Steerer Tube Length: 300mm (1 1/8-inch); 260mm (1 1/8-inch SC); 300mm (1-inch)
- Steerer Type: Straight
- Weight: 975g (1 1/8-inch); 1105g (1 1/8-inch SC); 963g (1-inch)
- Wheel Size: 700c

$229.95 - $249.95
The Ritchey Comp Carbon Road Fork was designed for how you love to ride. Built with High Modulus Fiber (HMF), this choice road fork offers superior strength. It's strong without sacrificing a pleasurable road feel. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from crown to shaft and increased impact strength. The orientation of the fibers have been optimized to absorb and dissipate loads, which delivers a confident and comfortable ride. The fork also uses various fiber types based on their specific properties to manage different load types as best as possible in the areas in which they occur, such as side load, torsion, and impact.
- Material: carbon blades / alloy steerer, crown, and dropouts
- Steerer length: 300mm
- Axle-crown: 368mm
- Rake/Offset: 43mm
- Crown diameter: 34mm (1") - 45mm (1-1/8")
- Spacing: 39mm
- Minimum tire clearance: 4mm
- Wheel compatibility: 700c
- Weight: 540g (with uncut steerer)
- Color: UD carbon finish (1-1/8") - 3K carbon finish (1")

$599.00
The Firestarter carbon fork is made from high-modulus carbon fiber, built for all-terrain riding. Three-Pack mounts on each leg give you room for water or Anything Cages, and mid-blade mounts accommodate racks for panniers. This fork is light, tough, and ultra-versatile with the capacity to fit a wide range of tire sizes.
- High modulus carbon fiber construction
- Tapered 1-1/8" to 1-1/2" steerer tube
- 160mm minimum rotor size; 180mm maximum rotor size
- Mid-blade mounts for low rider racks
- Compatible with wheel sizes: 27.5+, 29", 29+, 700c
- Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles
- BOOST 110 x 15mm thru axle included
- Front Axle Size: 15 x 135L, TP=1.5, TL=10
- Internal routing for 110 BOOST dynamo hubs

$59.99
- Brake mounts: Caliper
- Construction: Hi-tensile steel
- Rake: 50mm
- Type: LW
- Steerer type: Threaded
- Race diameter: 27mm
- Axle: 3/8'inch

$99.99
• Cantilever brake mounts
• 45mm rake
• Chromoly construction
• 1-inch steerer diameter
• 250mm steerer length
• Threaded fork

$45.99 - $49.99
• Caliper brake mounts
• 35mm rake
• High-tensile steel construction
• 1-inch steerer diameter
• 185mm steerer length
• Threaded fork
• Compatible with 20-inch wheels

$149.99
- Chromoly steel BMX style forks
- Perfect replacement for modern BMX-inspired wheelie bikes
- Steerer Type: Threadless
- Steerer Size: 1-1/8-inch
- Material: Chromoly
- Race Diameter: 30mm
- Axle: 3/8-inch

$59.99 - $65.99
• Cantilever brake mounts
• High-tensile steel construction
• Threaded fork
• Steerer diameter: 1-inch
• Steerer length: 200mm
• For bikes with 26-inch wheels

$89.99
- Forged dropouts with eyelets, straight-gauge oval tapered blades
- Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing
- 85mm threaded section
- Fits up to 30c tires
- Axle to Crown Length: 382 mm
- Brake Mount (Fork): Long Reach Caliper (55mm - 73mm)
- Crown Race: 27
- Front Axle: 9mm x 100mm
- Material: Steel
- Offset: 50mm
- S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill
- Steerer Type: Straight
- Weight: 839g, 876g, 907g
- Wheel Size: 27"

$130.00
Looking to go rigid? Then check out Salsa's 80mm suspension-corrected CroMoto Grande mountain bike fork. This chromoly beauty boasts ISO disc tabs for premium braking and it's 1-1/8" straight steerer lets you use it on older frames, or brand-spanking-new ones. It features Salsa's famous, forward-facing stainless steel fork ends and has room for tires up to 90mm wide. Plus, it comes with fender eyelets so you can stay clean even when it's sloppy out.
- Salsa Classico CroMoly
- Forward-facing, stainless steel dropouts
- 1-1/8? threadless steerer (260mm)
- 468mm axle-to-crown
- 45mm rake
- ISO disc tabs
- Tire clearance = 90mm
- Fender eyelets
-1080g with full-length steerer tube

$135.00
Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic.
- 100% CroMoly steel construction, curved blades, powdercoated
- Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown
- 51mm IS disc brake mount
- 26" has clearance for a 2.1" tire

$175.00
This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!).
- 100% CroMoly construction, fully brazed crown
- Mid-blade thru-blade eyelets
- Rack and fender eyelets at the dropout
- 12 x 100mm thru-axle
- Clearance for 27.5 x 2.32 or 700c x 42mm tires

$175.00
This beaut here was designed alongside our Midnight Special Frame. In an effort to shed a few grams (it's for a road bike after all), we opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice—don't you think? Now, we don't throw the phrase "future-proof" around lightly, so we won't use it here either. What we will say is that, like the Midnight Special Frame, this fork is equipped with modern road standards like flat mount disc brakes and a 100mm x 12mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!).
- Axle-to-crown: 400mm
- Steerer: 350mm, 1-1/8" straight
- Tire Clearance: 27.5" x 2.32" or 700c x 42mm (27.5 x 1.95" or 700c x 38mm w/fenders)
- Weight: 1254g

$135.00
Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic.
- 100% CroMoly steel construction, curved blades, powdercoated
- Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown
- 51mm IS disc brake mount
- 700c has clearance for a 45mm tire

$98.99
• Chromoly construction
• V-brake mounts
• Fits bikes with 16-inch wheels
• Steerer length: 250mm

$159.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition.
FEATURES
- Fully redesigned.
- Laboratory tested and team proven.
- New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance.
- All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race.
- New, optimized, 4mm dropout shape for grind and peg clearance.
- Updated 7075-T6 pre-load bolt
- Proven 41-Thermal processed 4130 chromoly
- Legendary lifetime replacement warranty
SPECS
- 32mm traditional offset
- 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)

$175.99
WeThePeople's Battleship Fork is strong and technical with super thick investment cast dropouts that are designed to be the perfect partner for WTP's most popular frame.
- Super short 24mm offset street fork
- Invest cast dropouts and fork end, designed to work flawlessly with plastic pegs and hub guards
- Incredibly strong design
- 7075-T6 alloy top bolt, M24 thread
- Tapered, triple butted fork blades
- Integrated crown race, designed to work with integrated headsets with a 45-degree bearing

$569.00
The Waxwing Deluxe fork is designed to thrive on gravel. Its carbon-fiber construction is lightweight and soaks up micro-impacts on rough roads. The 12 x 100mm thru-axle keeps Waxwing stiff for steady tracking and responsiveness when dodging ruts, potholes, and road debris really matters. Waxwing Deluxe is compatible with both 700c and 650B wheels so you run your preferred size. Three-Pack mounts, mid-blade low-rider rack mounts, fender mounts, and internal dynamo hub cable routing add form and function. The Waxwing Deluxe fork is standard equipment on the 2019–2020 Warbird, and is available in a version painted to match the Warbird frameset.
- Thru-Axle included
- Axle-to-Crown Length: 405mm
- Brake Type: Disc, flat mount, 160mm maximum rotor size, 42mm bolt length
- Color: Black
- S.H.I.S. Crown Race: 40mm, 36°, integrated crown race
- Fork Rake: 50mm
- Front Axle Type: 12mm thru-axle
- Front Axle Size: 12 x 120mm, TP = 1.5, TL= 12mm
- Front Hub Spacing: 100mm
- Material: High-modulus carbon fiber
- S.H.I.S. Clamp Diameter: 28.6mm
- Steerer Tube Length: 350mm
- Steerer Type: 1-1/8" to 1-1/2" tapered
- Weight: 520g
- Max tire size: 700c x 45mm or 650B x 51mm

$144.99 - $169.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and plenty of tire clearance.
Page 1 of 4
Next page