Stems

The forged alloy construction of the Bontrager Pro Blendr Stem delivers stiffness without compromising its light weight or sleek looks. Easy integration of lights, a computer, and more with the Blendr integration system make this stem a perfect upgrade for any bike. - Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems - 4-bolt dual band clamp securely holds handlebar - Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec - Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts - Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories - Approved for carbon bars and steerer tubes - Safe installation requires 5mm spacer above and below stem - Included Blendr accessories: Pro Mono Base, Trip Computer mount, and High Ion Light mount

- Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: +17 degrees, -17 degrees - S.H.I.S. Stem Clamp Diameter: 31.8mm

- 3D forged AL6061-T6 alloy construction - Designed for use with oversized 35mm handlebars - 40mm stack height - 4-bolt front loading faceplate design - ISO-Mountain safety certified Specifications: - Fork Dia: 1-1/8" - Bar Clamp: 35 - Angle: 0° - Material: AL6061 - Finish: Matte

- Full CNC machined AL6061-T6 alloy construction - Designed for use with oversized 35mm handlebars - 35mm stack height - 4-bolt front loading faceplate design - ISO-Mountain safety certified Specifications: - Fork Dia: 1-1/8" - Bar Clamp: 35 - Angle: 0° - Material: AL6061 - Finish: Polished

Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Perfect match with Descendant handlebars - 3D forged 7075 - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp

All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: In this particular model stem we’ve tailored the Oversized strategy to favor utility and access. The geometry has been altered to allow for easy handlebar removal while at the same time scavenging material from low stress zones. Ideal for those who don’t want to compromise on user experience to gain performance. These stems are engineered for the larger-sized racers.

All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model stem pushes our Oversized Technology to the extreme as it maximizes the shift of material from low stress zones to the Oversized interface. These stems are engineered for the smaller-sized racers. -Lightweight 3D Hollow Design -Front-Load Clamp Design to Fight Pull-Up Forces -Large Bar Bore -Large Hollow Clamping Bolts -Superior Strength

All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: In this particular model stem we’ve modulated the Oversized formula to emphasize pedaling stiffness. We have transferred material specifically to sectors that experience sudden stress from pulling up on the handlebars. You’ll feel a difference in your acceleration. These stems are engineered for the larger-sized racers. -Material: 6061-T6 Aluminum -Process: Cold-Forged -Hardware: Chromoly Clamping Bolts -Finish: Anodized w/Laser-Etched Graphics Weight: -48mm: 280 g / 9.8 oz -53mm: 290 g / 10.2 oz

The new Ritchey WCS Toyon stem takes its lead from the original, award-winning Ritchey C220 stem and gives it a more modern shape and increased stiffness for improved handling and greater responsiveness. The Toyon retains the clamping surface area of the C220, which creates a more secure interface by wrapping a full 220° over the handlebar. Its bolt forces are aligned with the clamp so that the body "embraces" the handlebar—a design which is less prone to damaging lightweight bars and allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. Built from life and all that inspires it, the Toyon builds upon the proven and celebrated C220 design with a fresh, squared aesthetic that adds to the overall harmony of modern frame designs—matching its good looks with enhanced confidence and a more lively feel for wherever your rides take you. - Matching top cap included - 6° of positive or negative rise - 1-1/8" steerer diameter - Stem body wraps 220° around bar clamping area, holding it in place for easy installation - Material: 2014 alloy - Bolts: stainless steel black - Matching top cap included - Angle: 84°/6° - Bar clamp diameter: 31.8mm - Bar clamp width: 44mm - Steerer diameter: 1-1/8" (28.6mm) - Steerer height: 42mm - Weight: 140g (100mm)

Full CNC machined AL6061-T6 alloy construction - 40mm stack height - 4 bolt front loading faceplate design - EN-Mountain safety certification

The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. - The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar - Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars - Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness

The S-Works Venge stem has been designed to work as a system with the Venge cockpit to optimize aerodynamics, stiffness, and weight. - Seamless integration with the 2019 Venge frame and hidden cables - Optimized for use with the S-Works Aerofly II handlebars for integration - Its dropped clamp and flat upper profile cheat the wind for the maximum aero advantage - Extremely stiff for responsive handling and out of the saddle sprinting

TruVativ's Stylo T30 Stem is 3D forged from 7050 aluminum for that perfect balance of low weight, stiffness and precision steering control uphill or downhill. Four bolts securely attach the face plate and also make changing out handlebars a breeze.

Specialized's S-Works SL Stem is sleek and lightweight. - 3D-forged and CNC-machined, 7075 aluminum road stem . - Includes expander plug for carbon steerer tubes and titanium hardware.

The Ritchey WCS Trail Stem represents Ritchey's first stem specifically designed for today's 5-6-inch travel trail bikes using wide bars. More than just a beefed-up version of other stems, with the Trail stem we revised the patented C260 clamp to a 220-degree version that fits a wider variety of riser bar bends and still packs a dramatic increase in stiffness and strength over competitor's designs. Using 3D Forged 2014 alloy, the WCS Trail Stem serves up superior strength while remaining lightweight. The extra-wide bar clamp takes stiffness to the next level, fits most riser bars, and ensures plenty of confident control out on the trail. - Material: 3D Forged 2014 alloy - Angle: Zero rise - Steerer Height: 45mm - Faceplate Width: 40mm - Steerer: 1-1/8” - Ritchey Blatte finish - 115g (70mm)

- 3-D forged AL6061-T6 alloy construction - 40mm stack height - 4 bolt front loading faceplate design

Developed for longer-travel trail bikes, Promax's S-29 stem offers the perfect configuration to set you up for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. These stems are cold-forged and CNC-machined from 6061-T6 aluminum for strength, low weight, and durability.

Strong, light, and capable The Kovee Pro 35 stem is the perfect centerpiece for cross country race bike. This lightweight stem is optimized for the latest XC mountain bike standard, with a 35mm clamp diameter that combines with a 35mm handlebar to provide a stronger, lighter system. An oversized 35mm clamp diameter MTB stem that offers increased strength and minimal weight - Oversized 35mm clamp diameter offers increased strength and minimal weight - 7075 T73, 3D, forged alloy construction - Laser-etched calibration marks make dialing in the perfect angle simple and repeatable - Compatible with both Knock Block and standard headsets and spacers - Blendr compatible for an elegant, integrated accessory mounting solution - Available in a wide range of sizes for today's mountain rider - High-strength, corrosion-resistant steel bolts - Approved for carbon bars

- Adjustable top mounted threadless stream - Adjustable from 0 to 60 degrees - Available in two lengths - Material: Alloy

Tom Dugan's signature DGN v2 stem is a classic top-load, 6-bolt design. Along with other Odyssey v2 stems, the bolt heads have been upgraded to a larger size and the clamping area features unique surface contouring for superior handlebar grip - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter)

You really can have it all; Ritchey's WCS C-220 stem features revolutionary stiffness and classically inspired good looks, but it’s quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3d forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Silver Finish - 121g (110mm)

Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.

RaceFace designed their Atlas 35 stem to reduce overall system weight while retaining the proven stiffness and performance the Atlas line is known for. The stem itself is measurably stiffer than the 31.8mm offering and, although the system is a seemingly burlier build, the weight savings gained by the reduction in bar material actually makes the 35 system lighter overall. An impressively light, strong addition to your aggressive trail or DH/FR build. - Four-bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm

At just 113g for a 100mm extension, the Energy stem represents cutting-edge aluminum construction. The shape is 3D-forged from 2014 aluminum for great strength, with the final refinements carried out by CNC machining. Titanium bolts complete the package. - Semi Integrated Cable routing (SCR) - 3D-Forged and CNC-machined from AL2014 - 4-bolt sculpted SL faceplate

Profile's Aris stem is a no-nonsense stem made from 6061-aluminum that's been shot-peened and anodized for strength and durability. The 4-bolt face plate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.

Simple, elegant, lightweight design can be run in negative or positive position for -17°/ 17° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 162g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±17°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 73° (±17°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm - Finish: Matte Black with White Accents

Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation

You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)

On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems. - Class-leading stiffness-to-weight ratio - More options for a better fit - New faceplate and geometry for greater stiffness and easier installation - Distinctive silver finish

Zipp's Service Course SL Stem, crafted from 7075 aluminum, features a shape that's strong and lightweight, resulting in a best-in-class 1.85 grams per newton meter of stiffness. That results in no-flex sprints and accelerations. This stem is a favorite of Zipp ambassadors and pro athletes. - Distinctive Zipp cosmetics - Zipp Quickview integrated computer mount available separately - Lifetime warranty