Stems

Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.

Proper fit on your bicycle isn't just for the pros. Swap out the old stock stem on whatever bike you ride for the adaptable Bontrager Comp alloy stem. - Construction: 6061-T6 forged and welded body - Removable 2-bolt face plate - Opposing 2-bolt steerer tube clamp - Corrosion-resistant steel bolts - Suitable for road or mountain use - Safe for use on carbon steerer tubes and handlebars - 50mm stack height

Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g

3D-forged and CNC-machined AL6061/T6 mountain bike stem. - 4-bolt cold-forged alloy faceplate - Chromoly hardware - 40mm fork clamp stack height

Origin-8's Classic Sport Quill Stem is crafted from light and durable forged 6061 aluminum with chrome-plated steel bolts. The handlebar clamp bolt is hidden for a clean look. Different lengths are available for customizing the reach to your handlebars. This sweet stem is 180mm tall from the bottom of the bolt to the top of the stem so that you can raise and lower your bars, too.

- Forged AL6061-T6 alloy construction - Matte finish with laser-etched graphics - ISO-Mountain safety certified - 4-bolt handlebar clamp - Quill length: 180mm

Salsa's Guide Stem is lightweight, durable, and provides excellent steering response on the road or trail. - Bead-blasted, then anodized - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation - Stack Height: 40

3-D forged AL6061-T6 alloy construction - 40mm stack height - 4 bolt front loading faceplate design

Run your favorite 31.8mm clamping diameter handlebar on a bike with Knock Block with the Rhythm Comp 31.8. It adds Knock Block compatibility to a durable stem with multiple lengths to let you fine-tune the fit to your ride. Get 31.8mm handlebar compatibility with your Knock Block system;Also compatible with standard headsets and spacers;Knock Block system protects frame from impacts by fork and handlebars by eliminating over-rotation of bars;Available in a wide range of sizes for today's mountain rider;See Service Parts for other Knock Block parts;

Kalloy's 822 Adjustable Stem lets you set up your handlebars exactly where you want them using just an allen wrench! With a 0-60° rise, you're sure to find a position that puts you comfortably in control. Its 4-bolt handlebar clamp makes bar changes easy and secure. - For quill-style steerers

The BrickTop alloy stem is a classic style, top-mount BMX stem with a 4-bolt handlebar clamp.

The DefendR BMX threadless stem has a AL6061 forged alloy construction and a 4-bolt face clamp. - 30mm stack height - 240g

With its alloy/steel construction and 4-bolt clamp design, the Freestyle is a trusty BMX quill stem. - Hollow-core stem bolt - Quill Length: 4-1/4-inches - Quill diameter: 21.1mm

With its alloy/steel construction and 4-bolt clamp design, the MX is a trusty BMX quill stem. - Quill Length: 4-1/4-inches - Quill diameter: 21.1mm

MSW 17° stems raise the bar—literally—for what riders can expect from an inexpensive stem. Rigorously tested to ISO-4210 Mountain qualification standards. - Tested to ISO 4210 Mountain standards - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate for easy installation

RaceFace's Chester 35 Stem is a practical stem with 2 length options and that legendary bomb-proof Race Face toughness baked right in. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Stack Height: 42mm

For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes

Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components. - Bead-blasted, then anodized, finish - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation

- Micro Grain Refined (MGR) alloy - 5mm headset spacer included - 2D forged MGR alloy - CNC weight optimized - Shotpeen anodized - Key technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy,CNC Weight Optimized - Length (mm) : 35 / 50 - Rise : 0 Degree - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): 150 (35mm) / 180 (50mm) - Finish: Shot peen anodized, laser logos

MSW 25° stems raise the bar—literally—for what riders can expect from an unassuming stem. Available in lengths from 60-110mm for custom fitting. Rigorously tested to ISO-4210 Mountain qualification standards. - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate for easy installation - Bead blasted & anodized black finish

- Steerer Diameter: 1" or 1-1/8" (includes shim) - Length: 70, 90, 110mm - Bar Clamp: 25.4 or 31.8 (includes shim) - Angle: +/- 35 degrees - Material: 6061 Aluminum - Shot-peen finish

• Forged aluminum • Single-bolt clamp • 180mm tall

- 3D forged 6061 alloy road stems in 6 or 17 degree angles - Lightweight 4 bolt faceplate - Material: AL6061-T6 - Finish: Sandblasted

Sunlite's Adjustable Quill Stem puts your bars right where you want them. This wonderfully easy-to-use stem adjusts from 0 to +50 degrees—more than enough to help you find your ideal position. And, the 2-bolt clamp holds securely holds your bars.

- Available in a variety of lengths, angles, and bar bores for the perfect fit - Road or Mountain compatible - 3D forged AL6061-T6 alloy construction - 40mm stack height - 4-bolt front loading one-piece faceplate design - ISO-Mountain safety certified

Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g

- C-220 degree extra-wide bar clamp improves stiffness and fits most riser bars - 3D forged 6061 alloy - 42mm steerer height with 41mm faceplate width - 142g (90mm)

- High angle stems designed specifically for use with Monstercross or Gravel bikes equipped with off-road drop bars - Available in +25° and +40° versions and lengths from 60 to 130mm - 3D forged 6061 aluminum construction - Fork Dia: 1-1/8" - Bar Clamp: 31.8 - Color: Blk - Material: AL6061

Origin-8's X-Tra Lift Stem Riser is an adapter that lets you raise your handlebars and stem. It fits over and securely bolts to 1 1/8-inch forks to extend them. This gives you more height to raise your stem/bars. You use the included spacers to dial in the best fit. The Stem Riser is made from forged 6061 aluminum and is anodized for durability.

FSA's Omega line is the perfect workhorse component group for the sport rider who wants race-winning technology and durability along with classic good looks. - 3D-forged and CNC-machined from AL6061/T6 - 4-bolt cold-forged face plate - Chromoly hardware - ±6° - 31.8mm handlebar clamp diameter - 35mm fork clamp stack height - 127 grams (100mm)