Other

The Problem Solvers Clamp-On Water Bottle Cage Mount makes it easy to carry a bottle on your handlebars so you can have even more refreshment on rides. It also comes in useful on frames without room for bottles, like smaller frames and some kid’s bikes.

The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.

Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.

ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake. - Made from CNC Machined T6061 Aluminum - Anodized Black - No additional hardware needed ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters

Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

Notched binder bolts for frames with integrated seat collars. Details: CroMoly steel bolts Three lengths available: 16, 19 and 21mm 8mm diameter

The Problem Solvers Chain Tensioner is a handy device that lets you cleanly install a derailleur on frames without a derailleur hanger. It's made of light and durable CNC-machined 6061 aluminum with steel hardware. It's designed for use with rear-facing horizontal dropouts and 10mm rear axles.

MisMatch adapters allow users to mount Shimano & SRAM brakes and shifters on one clamp. MisMatch Adapter 1.0/1.1 attaches SRAM shifters to Shimano I-Spec-A or I-Spec-B brake lever clamps. MisMatch adapters and the ever evolving “standards” it attempts to integrate between SRAM and Shimano is a confusing subject. Shimano brake and shifter mounting options have changed a lot, going through four mounting systems from 2011-2016. Shimano components have a model number printed somewhere on the brake and/or shifter, and this is the best way to determine what you own and what adapter you need. MisMatch 1.0/1.1 fits Shimano brake levers:BL-M985, BL-M988, BL-M820, BL-M785, BL-T785, BL-M675, BL-T675, BL-M640, BL-M596, BL-M820-B, BL-M785-B, BL-M675-B, BL-M640-B, BL-M615, BL-M506 - Annodized Black

MisMatch 1.2 adaptors allow users to mount a SRAM MatchMaker shifter to a Shimano I-Spec-II brake lever clamp. - Installation hardware included - Anodized black - Sold each

The Problem Solvers Backstop bolts onto the frame to provide two stops for your cable housing. It's made of light, durable CNC-machined aluminum with a stainless-steel bolt, and the stops are slotted for easy cable installation/removal.

The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.

The Problem Solvers Cable Pulley is the correct replacement for their Cross Clamp pulley (Cross Clamp sold separately) and it will also work on most frames that have a mount for a pulley. You get the aluminum pulley and the brass bushing.

The Problem Solvers Direct Mount Adapter gives you a place to install direct-mount Shimano and SRAM derailleurs. It was initially developed for standard mountain bike frames with 68/73mm wide bottom bracket shells, and is equally suited to fat/snow bikes, where their 100mm wide bottom brackets make front derailleur applications a little difficult. The adapter is made of light and durable 6061 aluminum.

The Problem Solvers Inner Chainring Bolts include 5 of the special threaded chainring bolts that fit into the chainring nuts on your crankset to hold the chainrings in place (chainring nuts sold separately). This type is 16mm long and made of rustproof stainless steel.

For riders who appreciate an elegant and streamlined setup, the Stem to Top Cap Tapered Spacer features a slight taper toward the top, allowing it to transition seamlessly to the Top Cap. - Anodized aluminum construction, no logos - Sold in packs of ten - 4mm outer diameter at base tapers to 32.5mm outer diameter at the top - S.H.I.S. Stem Clamp Diameter: 28.6

The Super Booster rear hub spacer kit is designed to give your 148mm rear thru-axle hubs the extra boost they need to fit any 157mm frame.

Attach these lightweight brackets to your water bottle bosses to serve as anchors for your cargo straps to carry just about anything, from sleeping pads to Nalgene bottles to barbeque sauce. These are a great addition to any bikepacking or touring cyclist’s on-bike storage toolkit. And their low profile means they don’t mess up the looks of your bike build while not in use.

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

Sold individually or as part of Problem Solvers' 6-bolt adapter assembly, this lock ring is meant for use with Shimano Center Lock compatible hubs. - External splines; compatible with external bottom bracket tools - For use with 12 – 20mm thru-axles - Aluminum construction

The Problem Solvers Cantilever Studs screw into the bosses built into bicycle frames to provide the proper mounting studs for brakes. Each brake requires two studs.

The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

The Problem Solvers Sheldon Fender Nuts are an awesome way to avoid the brake-centering problems caused by mounting fenders directly to your brakes. They're named after the inventor and bike guru, Sheldon Brown. These special Sheldon nuts take the place of your existing brake nuts. They have threaded extensions for standard 6mm bolts (sold separately) providing a secure mounting place for your fenders that won't mess with your brake adjustment. They make it easier/faster to install and remove fenders, too, so they're great for commuting bicycles.

The Problem Solvers Locking Headset Spacer is handy during headset servicing for keeping the fork in place when the top cap and stem are removed. It's also great for keeping the fork in the frame when you're shipping your bike in a box, which usually requires removing the stem and bars. This quality piece is for 1 1/8-inch forks and is CNC machined of light, durable 6061 aluminum and has a stainless-steel bolt.

I-SpecBar Clamps are a one-piece hinged clamp adapter that allows users to mount I-Spec compatible shifters or dropper levers onto the handlebar, without requiring an I-Spec brake lever. - Sold individually, the clamp can be mounted to the right or left side - Hinged clamp for easy installation without removing other components - Black Anodized, CNC AL-6061 Aluminum - Compatible only with Shimano I-Spec II compatible shifters or dropper post remotes - 23g

Problem Solvers has a couple different options for adding cable housing or brake hose guides to your bike. Choose from the adhesive stick-on option or the guide that mounts to existing housing stops.

The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 10mm wide. This is the right size for most double-chainring setups with a bashguard. These chainring bolts are made of aluminum and feature dual-hex heads for easy, secure installation.

The Problem Solvers Clamp-On Cable Guides are for clamping on the rear brake cable housing on your frame when the frame doesn't have provisions for holding a full-length brake cable housing. You get 3 stainless-steel clamps and the nuts and bolts for them.

The Problem Solvers Shifter Boss Covers are perfect for covering up the down-tube shifter bosses when you're converting a frame with them to a singlespeed/fixie setup. They're made of light, durable aluminum and sport a nice polished finish.